Hello, I've this Virtual Controller:
Nome: Aruba Operating System SoftwareTipo: 93ora build:2017-11-01 21:31:46 PDTVersione:126.96.36.199-188.8.131.52_62133
IP address: 192.168.1.321
I need to set up a dhcp to distribute addresses in the 192.168.1.1-192.168.1.127 range but I have some problems.These are my settings:net = 192.168.1.0mask = 255.255.255.128But I get this error: "subnet for magic-vlan is overlapping local interface subnet"
Is there a solution?
Frist, we have a little issue with your IAP IP-Address:
@mesantama wrote: IP address: 192.168.1.321
.321 is not valid IP-Address.
You cannot create an DHCP Range which include the IAP IP-Address.
Bevor I can help you, we need your correct IAP IP-Address.
This IAP-address is created in the past, now I change it.
What possibilies in subnet 192.168.252.0?
After I want an internal dhcp.
More clearly, the situation is as follows:- gateway: 192.168.1.252/24 with dhcp: 192.168.1.100-192.168.1.100.200 for LAN- aruba virtual controller 192.168.1.231 + 10 access points for wifiwe want to set up aruba so that it has the dhcp with addresses 192.168.1.1-192.168.1.100.100 for wifi devices
evry try I get the error: "subnet for magic-vlan is overlapping local interface subnet"
Perfect, thanks for clarify.
I tried to create a picture of your topology:
It looks like the IP Range for the magic VLAN is overlapping (magic VLAN is used for guest access, descripted in short).
To solve that, try to change the default DHCP Scope to a IP range which you don't need:
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2020 Hewlett Packard Enterprise Development LPAll Rights Reserved.