Wireless Access

last person joined: 3 hours ago 

Access network design for branch, remote, outdoor and campus locations with Aruba access points, and mobility controllers.
Expand all | Collapse all

Bandwidth Contracts for Guest Users on Aruba 7010

Jump to Best Answer
  • 1.  Bandwidth Contracts for Guest Users on Aruba 7010

    Posted Mar 19, 2018 01:27 PM

    we are trying to configure bandiwth contract (Upload- 5 Mbps, Download- 5 Mbps) for each Guest SSID users on Aruba 7010.

     

    we have configired upstream and downstream bandwith on Auth-Guest Role as a per user basis. but users connected to Guest SSID still getting full bandwidth (more than allowed /configured).

    OS Version: 6.5.4.3

    pls help me.



  • 2.  RE: Bandwidth Contracts for Guest Users on Aruba 7010

    Posted Mar 19, 2018 01:34 PM

    You need to apply it to the role the user gets after the user authnticates.



  • 3.  RE: Bandwidth Contracts for Guest Users on Aruba 7010

    Posted Mar 19, 2018 01:55 PM
      |   view attached

    HI cjoseph,

    yes we apply bandwidth contract on Post Authenticated Role (Auth-Guest)

     

    please refer the attachement (for our wlc have OS Version: 6.5.4.3, view is different, but on same role we have applied).



  • 4.  RE: Bandwidth Contracts for Guest Users on Aruba 7010

    Posted Mar 19, 2018 02:18 PM

    Do you have more than one controller?  If yes, did you do a "save configuration" or write mem?

     

     



  • 5.  RE: Bandwidth Contracts for Guest Users on Aruba 7010

    Posted Mar 19, 2018 02:36 PM
    Hi we have only one controller.
    Yes we save the configuration(save configuration/write memory)


  • 6.  RE: Bandwidth Contracts for Guest Users on Aruba 7010
    Best Answer

    Posted Mar 19, 2018 02:42 PM

    Please SSH into the controller and type "show user" and make sure that the user, after the user is authenticated ends up in that role.  After that, type "show rights <role>" to make sure that the bandwidth contract is applied.