Wired

last person joined: 3 hours ago 

Bring performance and reliability to your network with the Aruba Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of the ArubaOS-Switch and ArubaOS-CX devices, and find ways to improve security across your network to bring together a mobile first solution.
Expand all | Collapse all

HOW to isolete ports on comware7

  • 1.  HOW to isolete ports on comware7

    Posted Oct 01, 2016 09:28 AM

    Hello Community!!

    I need isolete traffic of diferents ports, for example I have vlan 30 with a lot of servers (physical servers and virtual servers) and they must not communicate between them.

    I tryed with port isoleted but it doesnt work:

     

    sys

    port-isolate group 1

     

    interface range gig1/0/2 to gig 1/0/24

     port-isolate enable group 1

     


    I tryed with private vlan, but its a really long configuration!!

     

    do you have any idea to share:)

    best regard...



  • 2.  RE: HOW to isolete ports on comware7

    Posted Oct 02, 2016 04:27 PM
    Are all of the servers on the same switch?


  • 3.  RE: HOW to isolete ports on comware7

    Posted Oct 02, 2016 04:28 PM
    Then port isolate should work


  • 4.  RE: HOW to isolete ports on comware7

    Posted Oct 03, 2016 08:26 AM

    Hello mrzero,

     

    Is a mix, some servers are in the same IRF stack and others in second IRF stack.

     

    The fact is that isoleted-port doesnt work!! the servers can ping between them :(



  • 5.  RE: HOW to isolete ports on comware7

    Posted Oct 04, 2016 10:15 AM

    port isolation only works on the same switch, if you need this across multiple switches then isolated private-vlans is the answer to your request.