My first post here & my first work with Aruba wireless :)
Is there any way to force the speed on an aruba 205 access point's ethernet interface to 100/full. A cisco switch that it connects to is showing lot of errors.The switch side was already tried changing to auto/hard coded.
Thanks in advance.
Ethernet Duplex/Speed Settings------------------------------Autoneg Speed (Mbps) Duplex Iface------- ------------ ------ -----on 100 Full bond0
Aruba Operating System Software.ArubaOS (MODEL: 205), Version 126.96.36.199-188.8.131.52
I think this is more of an IAP acting as the controller.
Please let me know. Thanks.
Goto "MORE > WIRED"
Select ETH0 profile and edit
** it will applied to ALL Access Point !!
Thanks, but our IAP does not show that option under wired.
It just has fields till admin status.
any other options that i can try please?
some screenshot would be helpful.
Make sure you click SHOW ADVANCED setting, or you can try using CLI
Thanks much. i got it finally.
Just another query , an IAP-275 is currently acting as the IAP controller role. However, there was another IAP acting as controller earlier, but it seems to be flapping on/off. Is there any way to look in the GUI of IAP to see the flaps & its reason to understand the role changes.
I think you should check on the switch logs for that. The main reason IAP changes master/role ussualy because the previous master is down.
Try changing the cable or port of the troubled IAP.
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.