I had provisioned a few Aruba 535 into a mobility controller. The controller is in MM-MC topology.
The controller version is 22.214.171.124
Once one of the AP is provisioned, the controller shows zero WLAN and zero connected clients as shown in the picture below.
From the CLI "show ap database long", it shows as follows:
The other AP has no problem and the user able to connect to it.
How should we tackle this issue?
What would be the output of:
show ap active
show ap bss-table
on the cluster member (controller) where you AP is terminated?
Do you also have an errors in your config, such as a missing VLAN? This can cause issues.
(Aruba7030) *[mynode] #show profile-errors
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2020 Hewlett Packard Enterprise Development LPAll Rights Reserved.