I wanted to implement LACP for a client.
I have two core switches aruba 3810 and for distribution switches aruba 2540.
Can you guys help how to configure LACP.
I also wanted to know if there's any software simulator like packet tracer for aruba switches.
Thanks in advance.
For LACP you need to create a trunk:
trunk 21,22 trk1 lacp
For port 21 and 22
For provision (ArubaOS-switch) there is no simulator, for ArubaOS-CX there is.
So configurations are made only on the core switch.
Lacp needs to be configured on both sides.
As you have 2 ArubaOS-Switch the command is equal to both switches.
Did you configure the core as a stack?
Can you share your overall design? Because only implement LACP is not enough.
Yes it's configured as stack.
Here's a brief setup ( find image)
Cisco Catalyst style...where are Arubas?
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.