As per the below post, the HP 5130 with version 7.0 onwards will add into Aruba AirWave NMS but not able to add and showing SNMP get failed error in AirWave.
I am trying to add with SNMPV3, I have tried HPE office connect and Universal device but no luck.
Can anyone provide the solution please....
Switch Model: 5130-24G-4SFP+ EI JG932A
VENDOR_NAME : HPE
Version 7.1 running
Thanks and regards,
When adding a device for SNMPv3, you need to update the Group -> select group -> Basic tab to use SNMPv3 for that device series type. Otherwise it will try to use the default SNMPv2.
Thank you for your reply.
Have got a solutioin for my issue.
Added the HP switch as a Universal device in AirWave, changed the SNMPV3 in the group and the below is the configuraion from swith end.
snmp-agentsnmp-agent sys-info version v3snmp-agent group v3 XXXX authentication write-view XXXXsnmp-agent usm-user v3 XXXX XXXX simple authentication-mode sha <password> privacy-mode aes128 <password>
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2020 Hewlett Packard Enterprise Development LPAll Rights Reserved.