Hi,
When i working on PowerArubaSW module, i found some bug (or feature...) on Aruba Switch (2920, 2930M/F, 3810, 54xxRzl)
First issue :
vlan_name is mandatory when use v4 (and after API) for add or configure a vlan
Second issue :
Before firmware 16.08.0002, when looking LLDP neighbor/remote via rest/vX/lldp/remote-device
You don't get ALL the list of neighbor (missing neighbor between a trunk/LACP...)
3th issue :
When using AnyCLI and show interfaces command, don't display the table (get issue with Firmware 16.05.xxx)
result : Port Name Status Config-mode Speed Type Tagged Untagged
-------- ---------- ------- ------------- -------- ---------- ------ --------
(but it is no really a good idea to call show interface, it is better to use Vlan/Port API...)