Our environment has a Aruba 7100 controller, Aruba APs, Airwave Server and some CISCO 1200 APs.
We have established WPA2-Enteprise SSID on the controller, along with 2 captive portales (employees and guest), however we need to add the CISCO APs to either the controller or the Airwave server and have them validate through WPA2-Enterprise. We are using the internal database on the controller. There is no Cisco controller on the network.
Is there a way to configure?
For the Cisco 1200s, are they running in autonomous mode? If so, then you can use group based templates in AirWave for their configs.
Unfortunately, with 2 vendors in play, you can't simply add the Cisco APs onto the Aruba controller. The APs will need the same SSID setup and captive portal. Most multi-vendor covered customers utilize Clearpass to handle the authentication and captive portal portion to unify the 2 vendor component.
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2020 Hewlett Packard Enterprise Development LPAll Rights Reserved.