I have a number of IAP-214 APs that were put in by another IT group. Unfortunately, password documentation was not left. It appears the APs are running the following software shown below......
[ 0.000000] Aruba Networks[ 0.000000] ArubaOS Version 126.96.36.199-188.8.131.52 (build 52666 / label #52666)[ 0.000000] Built by p4build@chios on 2015-11-22 at 16:41:06 PST (gcc version 4.5.1)
I have tried the password reset process documented by Aruba and this community.
- Connect to the console port or the master or slave
- Tried "admin" and "password" for the user name.
- Used "forgetme!" for the password.
Nothing worked. Aruba support stated that this password recovery method was eliminated with software v6.5.x. It appears I am running v184.108.40.206. Should the password reset process still work on the
I believe it was removed in IAP220.127.116.11 so will not work in your environment. After this the Password recovery is no longer available on IAPs. So this means you will need to complete a factory reset.
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.