Wired

last person joined: 7 minutes ago 

Bring performance and reliability to your network with the Aruba Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of the ArubaOS-Switch and ArubaOS-CX devices, and find ways to improve security across your network to bring together a mobile first solution.
Expand all | Collapse all

User-Roles Disabled on 2930M by Default

Jump to Best Answer
  • 1.  User-Roles Disabled on 2930M by Default

    Posted Nov 03, 2018 11:22 AM

    Hi, 

     

    Does anyone know how to enable the user-role functionality on a 2930m? I can't seem to find any documentation on this, and from what i can find it appears that it is enabled by default. From the GUI there isn't much and from the CLI ive tried the obvious "?" and "tabs" to no avail. 

     

    Aruba-2930M-48G-PoEP# show user-role

    User Roles

    Enabled : No
    Initial Role : denyall

    Type Name
    ---------- ------------------------------------------------------
    predefined denyall

    Aruba-2930M-48G-PoEP#

     

     

     Software revision  : WC.16.07.0002 

     

    Thanks.



  • 2.  RE: User-Roles Disabled on 2930M by Default
    Best Answer

    Posted Nov 03, 2018 08:07 PM

    For anyone who may need it, this was the command:

     

    aaa authorization user-role enable 

     

    This warning follows, FYI: Some legacy secure client access functionality is not supported when user roles are enabled.
    Please refer to the end user documentation for details.



  • 3.  RE: User-Roles Disabled on 2930M by Default

    Posted Nov 04, 2018 04:19 PM
    Take a look at the ClearPass Solution Guide for Wired Policy Enforcement.