I'm going through some compatibility documentation for a NAC product to see if it'll work with Aruba but I'm struggling to align things when it comes to OS description.
a. Aruba Central
b. Aruba IAP-305 access points
c. Those IAP-305 access points are running firmware 126.96.36.199_70086
Does that mean we are running:
a. ArubaOS 8.4
b. Aruba InstantOS 8.4
c. Something else that I'm missing :)
Appreciate any guidance, thanks!
The naming convention for Aruba Instant AP 305 is like this:
You can get information on support.arubanetworks.com
The software you are running is the Aruba Instant software, version 188.8.131.52 build 70086
The file that Abdul referenced is the specific compiled file for the model AP that you have. Other model APs may use a slightly different compiled file with a slightly different name, but they would all need to run 184.108.40.206 build 70086.
I hope this helps,
Thanks both, I think some of the problem is that the NAC vendor very genericly refers to things as either "Aruba OS" or "Aruba Instant OS".
David, from what you are saying I think it sounds like the best way I can describe it will be using the "Aruba Instant OS" label, so:
Aruba Instant OS 8.4
Would you both agree that sounds right?
Yes, that is correct.
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2020 Hewlett Packard Enterprise Development LPAll Rights Reserved.