I've a question about VIA tunnel terminations:
As I can see in the VIA guide, I've to map a Public IP to an Internal IP but in case of a cluster (AOS8.4):
Should I have one Public IP for each controller and map them to my controllers-IPs?
Or could I have just one Public IP for both controllers and map it to a dedicated VRRP VIP?
I haven't seen any documentation about implementing VIA on a controller cluster. Could you help me please?
You should have a static 1:1 nat to a single VIA controller. You configure your pool on the same controller. I am not aware of clustering for VIA traffic.
Thank you for your fast answer,
Then my VIA client is aware about both Publics IPs and will failover if it can't reach the 1st one?
In this case, how is it possible to manage load balancing?
The VIA client is not aware of clustering. You terminate it on the public ip address (or natted public ip address of a single controller). The via connection profile (when your VIA client first connects) will download a list of VIA controller ips. You can do a 1:1 nat of the second controller and enter the public ip address of the second controller into the VIA connection profile for redundancy. That list will be downloaded the first time the VIA client connects and can be used for redundancy. There is no connection to clustering in a VIA deployment.
Tank you for your replies.
Thanks all for your responses. i was having similar questions and your answers were helpful to me.
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.