am doing a new installation ..All the APs are joining to All Air Monitors Group, so am not able to broadcast my SSID
Have you provisioned the APs to a group which isn't configured to use Air Monitors? What do is the AP Mode which the dot11a and dot11g radio profiles configured as?
(Aruba7030) #show rf dot11a-radio-profile default
802.11a radio profile "default"
Radio enable Enabled
please find attached show command output
Can you provide the output of 'show ap active'.
I'm assuming the box has licenses, the APs have the correct reg domain etc. Is there any profile errors 'show profile-errors'.
attached both ...
What is the regulatory domain of the controller? Do you have licenses?
Domain is Saudi Arabia ...
yes i do have license for 144 AP ..its just installed today
the firmware is
will it be a problem
Can you confirm the DRT installed on the Controller?
#show switches regulatory
attached regualtory details
** EDIT **
It looks like even in DRT release DRT1.0_72277 the AP305 is NOT supported in Saudi Arabia.
To view the approved channels for this country domain, use the following CLI command:show ap allowed-channels country-code <country-code> ap-type <ap-type>
Dear i upgrded the firmware to 184.108.40.206
so its okay now ....but i have another issues which the clients can not access Network ...they are getting IP Address correctly ,,but no access to network..no ping to Gateway
the gateway is Core Swicth
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.