Good Morning all
We are int the end fase of implementing a wireless network.
Now is time for guest..
we have AOS8 cluster installed and Clearpass version 6.8 ( cluster)
We configured the guest wlan on th MC node and create the guest authentication with mac on Clearpass.
The DHCp is on the client side and the default GW is a CHeckpoint Firewall
We are not getting captive portal , and checking the FW logs we see that is address spoofing.
As I understand when we are connected to the guest , we get IP address but we are not redirected to the portal. on the chekpoint I only see drops from my client IP address ( IOS device for example)
IS there anything that could be done on the Aruba solution or we should config the FW to permit the client to come inside again on traffic.
Hope I cloud explain it good for understanting.
guest Vlan settings are manage on the client side. Do I need static IP on controller?
I do not have it for the corporate wlans. Only vlan ids.
Also Dhcp is managed by the client infrastruture and dns are client ones. Guest will use those dns.
But we have L3 configured on the FW to that Vlan Guest. ( .254)
You are saying that i should have one ( .253 ) on the controller side is that?
We get the portal now thanks
Now just need to check the service under clearpass.
It stays saying "please wait while we log you in " , after credential entered.
Thanks for the help
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.