We are currently running AirWave 184.108.40.206, Our AP's show the number of clients connected but our switches (2540). Is this feature available for the switches?
We can do snmp walk from AMPCLI>Advanced>Enter Commands and check if client count details coming from switch or not.
wlsxSwitchTotalNumStationsAssociated OBJECT-TYPESYNTAX Unsigned32MAX-ACCESS read-onlySTATUS currentDESCRIPTION"Total Number of Stations Associated to this switch.
Example, use syntax which ever protocol you are using to monitor devices.
$sw2 <ap_id> wlsxSwitchTotalNumStationsAssociated$sw3 <ap_id> wlsxSwitchTotalNumStationsAssociated
replace ap_id with device id which we get from Devices>monitor page URL of switch in Airwave.
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.