Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

AP515 Interfaces support the different VLANs respectively

This thread has been viewed 4 times

  • 1.  AP515 Interfaces support the different VLANs respectively

    Posted Dec 02, 2019 01:58 AM

    Hi Guru,

    Would like to find out if the interfaces for AP-515 can support different VLAN respectively.

    For example, interface E0 is supporting VLAN "Staff" and E1 is supporting VLAN "Guest".

    Understand this can be achieve with trunk or logical level, however this is not the case as customer looking at physically seggregation on interface level. Thanks.



  • 2.  RE: AP515 Interfaces support the different VLANs respectively

    Posted Dec 03, 2019 09:41 AM

    Make sense? After you use different radio for the SSID?



  • 3.  RE: AP515 Interfaces support the different VLANs respectively

    Posted Dec 03, 2019 10:30 AM

    Just trying to find out if Aruba AP 515 have this kind of flexibility, as the requirement is seggregate the uplinks by different VLAN.



  • 4.  RE: AP515 Interfaces support the different VLANs respectively

    Posted Dec 04, 2019 05:56 AM

    Hi Guru,

    Any advice for me ?