Wireless Access

last person joined: 9 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

8.x Multizone Configuration - HA Warning

This thread has been viewed 1 times

  • 1.  8.x Multizone Configuration - HA Warning

    Posted Feb 13, 2020 09:50 PM

    As I am configuring multizone the following message gets displayed:

    MMcSweeney_0-1581648508781.png

    Does this mean that if my Primary Zone controllers are configured in a L2 Cluster for failover that I can't user Multizone?



  • 2.  RE: 8.x Multizone Configuration - HA Warning
    Best Answer

    Posted Feb 14, 2020 06:53 AM

    No, it means that the "old" HA feature is unsupported. 

     

    The normal AOS 8 clustering is supported, just make sure you select the correct number of cluster nodes per zone.

     

    This is the old HA:

    https://www.arubanetworks.com/techdocs/ArubaOS%206_3_1_Web_Help/Content/ArubaFrameStyles/VRRP/HighAvFastFailover.htm



  • 3.  RE: 8.x Multizone Configuration - HA Warning

    Posted Feb 14, 2020 09:30 AM

    Thank you for the quick reply.  So if I have an L2-Cluster with 2 nodes in the primary zone I just need to have the node count as 2.



  • 4.  RE: 8.x Multizone Configuration - HA Warning

    Posted Feb 14, 2020 09:46 AM

    Correct.

     

    You can verify if there is a problem connecting to all cluster nodes with the cli command:

     

    show ap debug multizone ap-name <ap>

     

    The "L" flag will warn you if there is a problem with the number of nodes.