Wireless Access

last person joined: 21 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

what is the option to associate access point to differen controllers?

This thread has been viewed 0 times

  • 1.  what is the option to associate access point to differen controllers?

    Posted Mar 03, 2020 01:42 PM

    Dears,

    we have around 30 x AP225 access points associated with two controllers 7205 model (master and local) and all working fine.

    currently we purchae new controller to be used for different entity but will utilize the same access points.

    my question is how to configure the 30 access points to register to the new controller and keep the current setup not impacted?



  • 2.  RE: what is the option to associate access point to differen controllers?

    EMPLOYEE
    Posted Mar 03, 2020 03:59 PM

    You can create a new ap-group that has an AP system profile with an LMS-IP that points to the new controller.  You would then have to reprovision any AP you want to end up on the new controller into that new ap-group.



  • 3.  RE: what is the option to associate access point to differen controllers?

    Posted Mar 03, 2020 11:46 PM

    Thanks so much for you response

    I need all access points to associated to both controller concurrently.

    please share the document to do so

     



  • 4.  RE: what is the option to associate access point to differen controllers?

    EMPLOYEE
    Posted Mar 04, 2020 12:11 AM

    It is not possible in ArubaOS 6.x to associate access points to two different controllers at the same time.