I've scrubbed the ap details and ap tech support. No dice. Possible i over looked something.
The temperature is not recorded in any of the info, unfortunately.
well thats down right dissappointing. Thanks for the reply :)
There are some thresholding SNMPv3 inform things in the MAS MIB, but they don't give an actual temperature reading, just send informs, and probably don't work for APs, just MAS. I only know this because we are stealing back the wires our physical plant stole from us for some statistical thermos and I figured what the heck, might as well look. (Not that one can reliably use the backplane temperature of a single AP as a reliable source because it changes based on how busy the AP is.)
Will the access point send high temperature alarms or is there a trigger or alert that needs setup?
It does not send alarms and there is no trigger.
cool. thanks for the quick help.
Is there any improvement about that? I tried "show ap debug system-status ap-name AP_NAME" in Version 126.96.36.199 but I couldn't see anthing about temperature.
There is no temperature parameter, no.
Thank you Colin.
any update regarding the temperature
The ambient temperature is not available in any access points that I know of.
Closing this because it is 3 years old.
To be clear, the command above is only supported on the 534, 535 and 555 series 802.11ax access points.
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.