We will be doing a demo of the Vocera badges. Is there a Vocera guide? Is there anything that can be tricky with the configuration?
Aruba controller has a ALG for vocera so it should able to detect it from a firewall perspective , make sure that on the SSID you have the lower data rates enabled
There's already a Vocera ACL available on the controllers:
Make sure you read this document which has some good tips to allow Voice devices to roaming appropriately on wireless:
And also Vocera has best practices to work properly on wireless :
I have found a Design and Implementation Guide on the Aruba sight but it seems a little dated.
Check out this link for a full guide: http://www.vocera.com/products/documents/InfrastructureGuide.pdf
Check out this link for a summary guide: http://www.vocera.com/assets/pdf/documents/Vocera_IPGP_Summary.pdf
They should point you in the right direction.
Also, in this post: http://community.arubanetworks.com/t5/Unified-Wired-Wireless-Access/Vocera-ACL/td-p/48080 cjoseph mentions that Aruba's Roaming Devices VRD has a template for Vocera.
I just went through tweaking my Vocera network about a year ago.
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2020 Hewlett Packard Enterprise Development LPAll Rights Reserved.