Wireless Access

last person joined: 3 hours ago 

Access network design for branch, remote, outdoor and campus locations with Aruba access points, and mobility controllers.
Expand all | Collapse all

RAP3 with AP125

Jump to Best Answer
  • 1.  RAP3 with AP125

    Posted May 24, 2014 07:33 PM

    Hi All;

     

    I'd like to configure a RAP3 as a Virtual Controller, and use two AP125 (one connected in ETH2 and configured as a Mesh Portal, and another as a Mesh Point). I have a small branch office, but I need to use Mesh Points to cover all environment. 

     

    This is a possible configuration? Or just using IAP models?

     

    Best Regards. 

     

    Valter Junior

     

     

     



  • 2.  RE: RAP3 with AP125
    Best Answer

    Posted May 24, 2014 10:03 PM
    This scenario won't work for you using a VC , you will need an actual controller to do this with AP125's .

    But this could work if you had a couple of dual band IAPs


  • 3.  RE: RAP3 with AP125

    Posted May 24, 2014 11:42 PM
    The AP125 is a controller managed model. To use Instant and the virtual controller all APs must run instant (either the newer rap models or an IAP). If you need a low cost low density solution you might want to look at the IAP-103 as its list price is 395.