I have two 800 Aruba switches that are using (xsec point-to-point). I entered the correct MAC address from each other's end.
Interface fastethernet 1/1
Xsec vlan 4091
Xsec point-to-point 00:0b:86:50:ff:11 key allowed vlan 201,3001,4091
Interface fastethernet 1/0
Xsec point-to-point 00:0b:86:50:f6:31 key allowed vlan 201,3001,4091
Shouldn't this configuration work?
I think it will work.
Nope. The configuration below will work between two controllers.
Switchport vlan 1202 (switch vlan)
Xsec point-to-point 00:0b:86:50:ff:11 key allowed vlan 201,3001
Switchport VLAN 1202 (switch Vlan)
Xsec point-to-point 00:0b:86:50:f6:31 key allowed vlan 201,3001
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.