Wireless Access

last person joined: 18 hours ago 

Access network design for branch, remote, outdoor and campus locations with Aruba access points, and mobility controllers.
Expand all | Collapse all

AIrplay after updated to OS 6

  • 1.  AIrplay after updated to OS 6

    Posted Oct 24, 2013 02:18 PM

    We recently updated from OS 5 to OS 6. Now airplay no longer appears to work. I cant find any settings for airgroup in the cli or the GUI. Has anyone run into this before?



  • 2.  RE: AIrplay after updated to OS 6

    Posted Oct 24, 2013 02:54 PM

    Hi,

     

    It should be there under configuration, make sure airplay is turned ON from there.

    some useful commands (cli) 

     

    show airgroup status - check airplay is ON

     

    Show process monitor statistics - to check mdns is running

     

    Good Luck



  • 3.  RE: AIrplay after updated to OS 6

    Posted Oct 24, 2013 02:57 PM
      |   view attached

    I thought it should be there under advanced. Here is what I have.



  • 4.  RE: AIrplay after updated to OS 6

    Posted Oct 24, 2013 03:04 PM

    could u verify from cli, 



  • 5.  RE: AIrplay after updated to OS 6

    Posted Oct 24, 2013 03:30 PM
      |   view attached

    Airgroup is not an available option for the show command.



  • 6.  RE: AIrplay after updated to OS 6

    Posted Oct 24, 2013 03:52 PM

    can u try enable airgroup from cli, or may be your software version doesnt support airgroup.



  • 7.  RE: AIrplay after updated to OS 6

    Posted Oct 24, 2013 03:58 PM
      |   view attached

    Airgroup isnt an option for enable. Here is the version I am running.



  • 8.  RE: AIrplay after updated to OS 6

    Posted Oct 24, 2013 07:30 PM

    @praetorrian wrote:

    Airgroup isnt an option for enable. Here is the version I am running.


    Airgroup is only available in ArubaOS 6.3. and above, or the technology release 6.1.3.6-airgroup (not recommended).  You will not see the airgroup commands outside of those releases.