I would like to build a VPN server (Linux/Windows) and terminate with L2TPv3 the VPN tunnels of some iAP's of our clients.
1) Is this possible? I looked on the documentation and I saw only how to set up from the iAP the tunnel but no reference on what has to be on the other end of the Tunnel.
2) If it is possible - I would very much encourage to share that type of config from the 3rd party vendor.
I will for the next few days try anyway to establish something like this on a Windows server (limited given the working environment).
I'd be interested to see this working. Keep us posted! :smileyvery-happy:
At present the only supported hardware for terminating IAP's is Aruba Controllers.
I Beleive we can make it work only if we use the right Layer2 or Layer 3 if we can NAT the IAP VC to a public IP we may can do it just choose the same type of VPN on both side and same authentication method must be supported from both sides this is normal in any networking.
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.