Okay im trying to convert it and its not working...
I got RAPs 2 already working properly
But when i try to convert a rap 3 which is on instant mode to remote AP and i put the controller public ip address its not working...
I got 4500 and tftp port open....
it send me a message that the vpn setup failed....
There is anything else it need to be done for this convertion?
The controller needs to be on the 184.108.40.206 code designed for RAP3s for this to work.
Collin where do i get this firmware?
the lastest one i can see is
i can see the 220.127.116.11 on fips folder but on the normal folder on Aruba OS is not there... on gneeral i see that one i said before on technology folder got something of airgroup and on technology folder in aruba os is empty...
6.1.4.x is in Controlled Release for pilot testing. Please contact Aruba TAC to obtain a copy. 6.1.4.x will be rolled into 6.2 GA which should be available before the end of the year.
So to use rap 3 as a remote AP i need to use a pilot testing version?
If so its no good for production network i guess... at least not yet...
is rap 3 a really new product or something?
RAP-3WN began shipping mid / late July '12.
We just started posting code to the TAC site as General Availability, Early Deployment, and Technology releases and will use this moving forward. Definitions of each category can be found here:
Thank you very muhc for the information
Just one last question
there will be no more revisions for .6.1.3.x?
Now you guys starting with 6.1.4.x already?
6.1.4.x is branch based on 6.1.3.x.
6.1.3.x is an active branch.......18.104.22.168 was just released a couple of weeks ago.
I'm not sure if there will be a 22.214.171.124 or if we will go straight to 6.2 at this point which should be out soon.
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.