i'm trying to snmpwalk the controller to receive the IPs of our RAPs. I know that i can use the OID .184.108.40.206.4.1.148220.127.116.11.18.104.22.168.5to display all the IPs of the online RAPs. But i don't know which RAP has the displayed IP.
For example the output of the walk is : (IPs are changed)
SNMPv2-SMI::enterprises.14822.214.171.124.126.96.36.199.188.8.131.52.166.92.176 = IpAddress: 10.141.50.169SNMPv2-SMI::enterprises.148184.108.40.206.220.127.116.11.18.104.22.168.166.101.144 = IpAddress: 10.141.50.175SNMPv2-SMI::enterprises.14822.214.171.124.126.96.36.199.188.8.131.52.166.105.96 = IpAddress: 10.141.50.173
Let's take the first result. The Identifier seems to be "0.36.108.166.92.176" . I've read that this has to be the MAC Adress in decimal code, am i right ?
I can recalculate the MAC by changing these decimal code into hexademical ==> MAC adress should be:
but there is no RAP with this specific MAC Adress. RAP with the IP 10.141.50.169 has the MAC 00:24:6c:c2:65:cb.
Afterwards i found this article:
According to this article i have to do the following:
get the last 20 bytes:
2 65 cb
shift them to left
26 5c b0
replace the last 24 bytes of the MAC Adress:
Now in decimal code:
but according to the snmp output the BSSID is:
I'm a bit confused now....
Did i missunderstood something or did i overread something ?
Help is appreciated
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2020 Hewlett Packard Enterprise Development LPAll Rights Reserved.