I got one 7210 as the master, and two 3400 as the local in remote site, the remote site APs terminate at the local controller (3400) using LMS.
I want to configure MAC authentication using the controller's internal DB, knowing that the internal DB can't be synced between master/local controllers, so in this case, should I add the MAC address in both 7210 and 3400' internal DB? Or should I only add the MAC address in the master (7210) controller (which implies that the authentication will only happen at master controller even the remote site APs terminate at the local controller) ?
You can use this :
aaa authentication-server internal use-local-switch
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2020 Hewlett Packard Enterprise Development LPAll Rights Reserved.