I have a 3200 that I was using for some network testing (didn't install any licenses on it). I would like to use this 3200 in our production environment, but I still a lot of testing configuration on it. I want wipe the config have start over with an initial config. I know there is a way to do this with the GUI, but I no longer have GUI access to it and am looking to wipe it from the console. We are using 188.8.131.52. Thanks.
Save your licenses by doing "show license verbose" and then do a "write erase all"
Or you can save your license to a file on the controller. So you can do an import license after you have cleared the config.
(Aruba651) #license export license.txt Successfully exported 8 licenses from the license database to license.txt
As u mentioned in your query that there is no any license on controller then use the command as cjoseph suggested.
(Aruba650) # write erase allSwitch will be factory defaulted. All the configuration and databases will be deleted. Press 'y' to proceed : yes
(Aruba650) # reload
This command take the controller to factory default....:)
Just as a side note. My force of habit to do a "wr mem" before the reload negates the "write erase all."
So make sure you do the commands exactly as stated.
Thanks guys. Knew it was something simple, just couldn't remember.
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2020 Hewlett Packard Enterprise Development LPAll Rights Reserved.