Wireless Access

last person joined: 5 hours ago 

Access network design for branch, remote, outdoor and campus locations with Aruba access points, and mobility controllers.
Expand all | Collapse all

AOS6.3 show ap arm state command

  • 1.  AOS6.3 show ap arm state command

    Posted Apr 10, 2014 06:19 AM

    Hi!


    On AOS version 6.3.X.
    The command "show ap arm state" shows new items as follows.

    "Path Loss (dB)" "Neighbors (R/T)" "Relevant"

    Would you teach someone what these mean ?

    I tried to find CLI guide, but I couln't find.


    (aA-3200) #show ap arm state
    AP:6c:f3:7f:c6:cb:26 MAC:6c:f3:7f:ec:b2:70 Channel:116 EIRP:22 Max EIRP:22 Edge:enable
    Client Density:0 Valid neighbors: 5 Relevant neighbors: 4 Rx Probe Reports: 54
    Moves(T/S):0/0 Sticky(T/S):0/0 Bandsteer(T/S):0/0 Loadbal(T/S):0/0
    Neighbor Data
    -------------
    Name               IP Address    SNR (dB)  Path Loss (dB)  Channel/Pwr  Neighbor Density  Neighbors (R/T)  Relevant
    ----               ----------    --------  --------------  -----------  ----------------  ---------------  --------
    18:64:72:c1:37:ac  172.22.4.177  53        101             40/15        0                  5/5
    d8:c7:c8:c0:53:14  172.22.4.162  59        50              52/16        0                  4/5             Yes
    Legend: R = Relevant, T = Total,  Neighbor Density = (Overlap/Neighbor's Density/ Overlap to local density ratio/ Overlap to neighbor's density ratio)

    ArubaOS (MODEL: Aruba3200), Version 6.3.1.3



  • 2.  RE: AOS6.3 show ap arm state command

    Posted Apr 10, 2014 07:21 AM
      |   view attached

     

    Attachment(s)



  • 3.  RE: AOS6.3 show ap arm state command

    Posted Apr 10, 2014 10:54 PM

    Thx!!

     

    I want to know

     

    "Path Loss (dB)", "Neighbors (R/T)" and  "Relevant"

     

    They are new informations on 6.3.

     



  • 4.  RE: AOS6.3 show ap arm state command

    Posted Jun 21, 2014 11:13 PM

    intresting.. I also wish to know what it is.. 



  • 5.  RE: AOS6.3 show ap arm state command

    Posted Mar 18, 2015 12:30 PM

    It's been a full year and the CLI guide is still out of date.  This isn't documented anywhere that I can find.  



  • 6.  RE: AOS6.3 show ap arm state command

    Posted Mar 18, 2015 02:27 PM

    Wgrandis,

     

    If you want those parameters to be documented, please login to the support site and leave the request on the ideas portal.  Documentation and features are added changed and maintained based on customer demand.