i would know if exist a guide to implement the LAN extension.
i have a controller that have two VLAN:1) VlAN 1 (MANAGEMENT address).2) VlAN 20 (for this vlan the controller doesn't have an address)
The controller have two interfaces linked to a switch, fa1/7 (in access on VLAN 20)and fa1/6 (in accesso on VLAN 1).
I want to propagate by a RAP the VLAN 20, and if i connect to rap's SSID, the controller links me to the switch in Layer 2.So is like if i am directly connected to my LAN without routing, and i recive an ip by my external dhcp, and the controller works like a L2 switch.
is it possible?if it is, there is a particular configuration?
Entirely possible and very simple.
Just create your VAP with whatever other settings you want, and associate it with VLAN 20.
OK now it works!
i have tried connect to ethernet port of RAP, but i don't receive any ip.
how can i assign the same Vlan to ethernet port of RAP?
thanks in advance
Under AP> Ethernet Interface Port X configuration> Wired AP, you need to enable it, and put in the VLAN that you want wired devices on.
the correct path is: wizard>Under AP> Ethernet Interface Port X configuration> Wired AP?
Perfect, very easy.
Thank you, now all works fine.
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2020 Hewlett Packard Enterprise Development LPAll Rights Reserved.