I have 700 AP135 to install, i would like to prepare the project before having the AP and Mounting kit.
The document Aruba AP-130-MNT-W2 installation guide has some informations (how to install it) but have no information about dimension.
someone has it (HxWxD) ?
Only info i found for you is regarding the AP unit itself..
Hope it will help u to fit the AP/mount (usually the mount isn't much bigger in the width from the AP and it shorter in the height.
thanks for your answer.
But i will like have the depth. I would plug a secure cable. The rj45 connector is slightly longer than normal connector (I do not have the exact size yet) and i will be sure this cable is good for the rack mount kit.
A mechanical drawing of the AP-130-MNT-W2 box is attached (plastic part only; slider and spring not shown).
You only have about an inch clearance behind the RJ45 connectors, which means that you'll need to use low-profile plugs to leave enough space to allow for the cable bend radius. It will be very difficult (impossible?) to use cables with the bigger molded-on RJ45 plugs; the expectation is that the cable is cut at the AP and terminated with a crimped-on plug.
Hope that makes sense.
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.