I have bought an Aruba 620 controller with 4 AP-105 and 4 AP-93 accespoints. My setup is really simple.
My modem is also a router. This is my DHCP/DNS server. It has 192.168.1.1 ip. My Aruba controller is working fine. It has 192.168.1.20 IP. I have runned the wizzards for the controller and AP's. Pointing 1.1 as gateway and dns/dhcp. I have the problem that all my accespoints come up inactive.
I have the latest firmware, 184.108.40.206. (same problem with earlier firmware)
I have created multiple AP groups, no mather in wich one they show up inactive. How do I troubleshoot this problem?
All my ports are trusted and active. I have a POE licence active.
what to do?
Because you have no Virtual-AP assigned in that ap-group:
show ap-name "AP105-1"
show ap ap-group ap-name "AP105-1"
AP group "Aruba"
Virtual AP N/A <-----------------
802.11a radio profile default
802.11g radio profile default
Ethernet interface 0 port configuration default
Ethernet interface 1 port configuration default
Ethernet interface 2 port configuration shutdown
Ethernet interface 3 port configuration shutdown
Ethernet interface 4 port configuration shutdown
AP system profile default
Thanks. I have resetted the the device to factory settings. I added a virtual AP. still no luck. Here are the new logs
solved! changed to tunnel mode: http://community.arubanetworks.com/t5/Unified-Wired-Wireless-Access/AP-105-not-working-in-bridge-mode/td-p/23280
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2020 Hewlett Packard Enterprise Development LPAll Rights Reserved.