@$k3l3t0r wrote:
Have a new pair of 7220's (running v6215) configured as Master/Local and the access policy/firewall on the local does not reflect what is configured on the Master. I would expect changes made on the master to propogate to the local when applied/saved, which is certainly the case on our older 6000 setup.
Other elements of the config appear to sync ok, and they are aware of each other.
Which elements? There are some elements that are Global and Some elements that are local to the specific controller.
If you type "show switches" on the commandline of the master it will tell you who is in synch and who is not. If you type "write mem" on the master controller it will synch your controllers.
#7220