Wireless Access

last person joined: 21 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

AP135 console parameters

This thread has been viewed 2 times

  • 1.  AP135 console parameters

    Posted May 27, 2013 10:26 AM

    Dear all:

     

    We are working on a new installation AP135 / AP105 and S3500 having a remote controller.

     

    All AP105 are reachable thru the console port 9600-N-8-1, nevertheless connecting the same cable using the same parameters to the AP135 doesn't work.

     

    Any clue ?

    Regards,

    Nelson

     



  • 2.  RE: AP135 console parameters

    EMPLOYEE
    Posted May 27, 2013 10:40 AM

    Make sure you are connecting to the serial port ;)



  • 3.  RE: AP135 console parameters

    Posted May 27, 2013 10:58 AM

    Sure !

     

    In fact, unplugging the connector from one AP105 to another I got immediate response in the TTY terminal, but doesn't happens the same when connected to the AP135

    @cjoseph wrote:

    Make sure you are connecting to the serial port ;)





  • 4.  RE: AP135 console parameters

    EMPLOYEE
    Posted May 27, 2013 10:59 AM

    Okay.  Try a different AP-135.  It should work exactly the same as the 105.  Make sure you have no flow control on...