Wireless Access

last person joined: an hour ago 

Access network design for branch, remote, outdoor and campus locations with Aruba access points, and mobility controllers.
Expand all | Collapse all

Manual Blacklist not working

Jump to Best Answer
This thread has been viewed 0 times
  • 1.  Manual Blacklist not working

    Posted Jan 18, 2014 05:12 PM
    All,

    I used the GUI of a IAP-93 (running software version 6.3.1.1) to blacklist a MAC address and yet the wireless client still continues to associate to the AP and able to transmit packets as if the blacklist was never performed. I even tried to do it at the CLI and still same failed result. I performed these steps to enable it:

    Web UI: Security>Blacklist (tab)>typed mac addresses into box under title, "Manual Blacklist", clicked 'Ok'.
    CLI: conf t, blacklist-client <mac-address>, end, commit apply

    I even tried even rebooting the AP afterwards and still it is not working.

    Has anyone come across this problem? Is there a bug with the software?
    Adil


  • 2.  RE: Manual Blacklist not working

    Posted Jan 18, 2014 05:36 PM

     

    Apologize , missed the IAP part



  • 3.  RE: Manual Blacklist not working

    Posted Jan 18, 2014 07:50 PM
    Yes, I tried from the CLI. This is an IAP-93 so there is no 'stm ...' command. The command is "blacklist-client <MAC address>". I tried it both ways - CLI and web UI. I checked the admin guide and I believe I did all the required steps to enable it (steps outlined in my original post).

    Adil


  • 4.  RE: Manual Blacklist not working

    Posted Jan 21, 2014 01:40 AM
    What OS you are using?


  • 5.  RE: Manual Blacklist not working

    Posted Mar 06, 2014 05:36 PM
    The IAP-93 is running code version 6.3.3.1-4.0.0.1_41049. Has this issue been fixed in a later release?

    Adil


  • 6.  RE: Manual Blacklist not working
    Best Answer

    Posted Mar 07, 2014 02:57 AM
    Have u enabled Black Listing on SSID ???


  • 7.  RE: Manual Blacklist not working

    Posted Mar 08, 2014 09:50 PM
    That was it! I enabled blacklisting for the SSID and now it is working.

    Thank you so much!

    Adil


  • 8.  RE: Manual Blacklist not working

    Posted Feb 20, 2014 12:19 PM

    Did you ever get this working? I've opened a post on the IAP forum with exactly the same issue!

     

    Regards

     

    Mike



  • 9.  RE: Manual Blacklist not working

    Posted Feb 26, 2014 08:57 AM
    Hi Mike,

    I never got this to work. I think it is a bug in the software. I tried do
    it using both CLI and GUI and same failed result. If you come across a
    working solution, please let me know.

    Thanks,

    Adil