Hi guys I just recently started having another problem with my controller. It says I have 30 licenses and that 25 are used and I have 5 available, Also it says I have 30 PEFs and 25 are being used. However when I try and set up a new AP, it will not grab an image from the controller and it will not sync up to the server as available for provision. Can someone point me in the right direction as where to start diagnosing?
Apparenty our new 1080p 180degree camera install was basically DDOSing our switch and not letting the ap get out. It is working now with the camera offline, thanks.
Just had a similar issue.....
Make sure your DNS is handing out : aruba-master and pointing the IP address at the master controller....
Thank you, that could have been contributing to the issue also as it was not added.
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.