Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor and campus locations with Aruba access points, and mobility controllers.
Expand all | Collapse all

AP105

Jump to Best Answer
  • 1.  AP105

    Posted Mar 27, 2013 06:35 AM

    I have been told that the AP105 initially starts up on channel 124 in the 5GHz band when first powered on. Is this the same for all current models of APs?



  • 2.  RE: AP105

    Posted Mar 27, 2013 07:56 PM

    That does not seem correct to me. What channel the AP will come up on depends on supported channels (regulatory) and software configuration (supported channel set and how actual channels are selected: manual or ARM).

    Where did you get this info?

     

    Thanks,

    /Onno Harms



  • 3.  RE: AP105

    Posted Mar 28, 2013 03:10 AM

    The country code set is GB, for United Kingdom, and the information given to me was from TAC as part of an investigation. Any information regarding how it makes its choice is useful, if it does not like channel 124 does it pick another one at random, does it cycle through the channels moving up or down. Is ARM controlling the channel selection when the AP first boots up bearing in mind this is a persistent RAP and may not have a connection to the controller.



  • 4.  RE: AP105
    Best Answer

    Posted Apr 01, 2013 05:32 PM

    From the Engineering team:

    Last used channel is saved on the AP flash and is used the next time

    Else a random channel (which will be corrected by ARM) after some backoff

     

    Thanks,

    /Onno