last person joined: an hour ago 

Enterprise security using ClearPass Policy Management, ClearPass Security Exchange, IntroSpect, VIA, 360 Security Exchange, Extensions and Policy Enforcement Firewall (PEF).
Expand all | Collapse all

amigopod 3.7 - radius proxy priority

Jump to Best Answer
  • 1.  amigopod 3.7 - radius proxy priority

    Posted Oct 14, 2013 09:39 AM

    In AmigoPod 3.7.

    When configuring 2 radius proxies  authentication servers with priorities as follows..


    nps1 priority 100

    nps2 priority 110


    is there a fail-through active? Or is nps2 only used when nps1 is down?

    Is it possible to configure a fail-through where always both nps servers are used untill a match is found? 

  • 2.  RE: amigopod 3.7 - radius proxy priority
    Best Answer

    Posted Oct 14, 2013 08:45 PM

    Amigopod 3.7 is EOL, you really should upgrade to 3.9 if you still want support on Amigopod.


    Multiple RADIUS proxy servers in Amigopod is not a recommended configuration.


    RADIUS proxy cannot distinguish between "access reject because password is wrong" vs. "access reject because user is not found". Both of these have the same response - Access-Reject - but in the first case, you need to fail immediately, and in the second case you would typically want to fail-through to the next server.


    With 2 proxy servers configured the only mode of operation available is backup: if the first server is unavailable, the second server will be used.  There's no way to configure it differently.