Wireless Access

last person joined: an hour ago 

Access network design for branch, remote, outdoor and campus locations with Aruba access points, and mobility controllers.
Expand all | Collapse all

Using both 5ghz radios on AP224?

Jump to Best Answer
  • 1.  Using both 5ghz radios on AP224?

    Posted Dec 10, 2014 09:51 AM

    Does anyone know if it is possible with the AP225/224 to set both the radios to 5ghz? I understand that for this to work well you would need to use extrenal attennas place far enough apart. Another wireless vendor is saying that they could do it and I am just looking to see if Aruba can. Thanks!



  • 2.  RE: Using both 5ghz radios on AP224?

    Posted Dec 10, 2014 10:05 AM

    This is not currently possible. 



  • 3.  RE: Using both 5ghz radios on AP224?

    Posted Dec 10, 2014 10:14 AM

    Hi,

     

    No. Aruba APs doesn't support this, we can not configure both radios with the same band ( 2.5 GHz or 5 GHz) .

     

    You should select separate bands for each radio.

     

     

     

     



  • 4.  RE: Using both 5ghz radios on AP224?
    Best Answer

    Posted Dec 10, 2014 11:02 AM
    The radios in Aruba APs are for each separate frequency only. If you were doing outdoor mesh the MSR series radios are capable of this