Wireless Access

last person joined: 5 hours ago 

Access network design for branch, remote, outdoor and campus locations with Aruba access points, and mobility controllers.
Expand all | Collapse all

automate shutdown%0D%0A

  • 1.  automate shutdown%0D%0A

    Posted Nov 14, 2014 09:26 AM

    Good Morning

    It is my understanding that 7210 controllers cannot withstand a hard shut down or immediate loss of power. Shutdown has to be initiated by GUI or CLI, correct?

    Has anyone set up a system? Or is there a way to automate shutdown of a 7210 controller?

    We backup flash and have pri and sec controllers so DB is sync

     

    Thank you


    #7210


  • 2.  RE: automate shutdown%0D%0A

    Posted Nov 14, 2014 09:44 AM

    JB2014,

     

    Where did you hear that it cannot stand a hard shutdown?

     



  • 3.  RE: automate shutdown%0D%0A

    Posted Nov 14, 2014 10:02 AM
    Hello cjoseph

    The Aruba Engineer who installed the hardware.
    Was he wrong?
    Can the 7210 in fact withstand a cold shutdown? And be able to be
    restarted without any problems?

    Jim Bates
    Network Analyst
    MAC/iPAD Specialist
    NPS I.T. Department
    413.587.1377

    --



    Please remember when writing or responding to email, the Massachusetts
    Secretary of State has determined that e-mail is a public record.

    All electronic messages sent from the Northampton Public Schools
    are archived in conformance with Massachusetts and Federal Public
    Records law.
    #7210


  • 4.  RE: automate shutdown%0D%0A

    Posted Nov 14, 2014 10:32 AM

    JB2014,

     

    He is not correct.

     

    The 7200 is designed to be powered down and restarted without problems.  If you do have a problem, you should open a TAC case, so that they can get to the bottom of it.