Wired

last person joined: an hour ago 

Bring performance and reliability to your network with the Aruba Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of the ArubaOS-Switch and ArubaOS-CX devices, and find ways to improve security across your network to bring together a mobile first solution.
Expand all | Collapse all

MAS regularly stops responding to SNMP Get-requests

  • 1.  MAS regularly stops responding to SNMP Get-requests

    Posted Nov 10, 2015 02:41 PM

    I have two MAS stacks that have recently started the habit of not responding to SNMP get-requests for a period of time each day. It's become predictable - around 12:20 - 12:30 PM each day, our middle-school and high school MDF stacks stop responding to SNMP requests. The middle-school stack will begin responding again within about an hour, the high school stack in about 2.5 hours. The switches continue to function normally during this time. Solar Winds Orion shows them as 'up' because they respond to ping; AirWave shows them as 'down' because I think it uses SNMP as its up/down status indicator. Firmware version is 7.4.0.3, scheduled to upgrade to 7.4.1.1 in the near future. Only recent change that has occurred that I'm aware of is an upgrade to Solar Winds NCM, which should have no effect on AirWave. Edge switches in the fabric don't display this behavior; other two MDF stacks (at two elementary schools) MAY, on occasion, show some interfaces in 'warning' state briefly during this time, but come back to normal quickly.

     

    Any clues on what might be going on?



  • 2.  RE: MAS regularly stops responding to SNMP Get-requests

    Posted Nov 15, 2015 10:44 PM

    It's unusual behaviour. IIt could be some network issue around that time.

    Open a TAC case for assistance.