Can anyone explain the difference between these two config parameters and when you would want to configure each?
RF -> ARM -> Min Transmit Power, Max Transmit Power
RF -> Radio -> Customize ARM Power Range [2.4GHZ | 5GHz] -> Min Power, Max Power
Also how to these relate to Aruba's recommended power levels from the VRDs?
The per band (2.4 / 5GHz) has been introduced recently to allow different ARM power settings per band, so you can set the power on 5 GHz slightly higher over 2.4 like advised in the VRDs.
The RF -> ARM is a global setting, so it applies to all radios.
I just tested in my lab, and what happens is that if you have set the RF -> Radio -> Customize ARM Power range, that setting will take precedence. If you have not set it for the specific band, the setting in RF -> ARM -> Min/Max transmit power will be set.
You can also set static channel+power on the AP itself in the Radio tab. That will disable ARM for that radio(s), and configure static settings.
Thanks this is exactly what I was looking for!
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.