Wired

last person joined: 14 hours ago 

Bring performance and reliability to your network with the Aruba Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of the ArubaOS-Switch and ArubaOS-CX devices, and find ways to improve security across your network to bring together a mobile first solution.
Expand all | Collapse all

upgraded MAS s2500 from 7.3 to 7.4.0.1 and some interfaces lost vlans

  • 1.  upgraded MAS s2500 from 7.3 to 7.4.0.1 and some interfaces lost vlans

    Posted Feb 19, 2015 04:09 PM

    config before upgrade

    interface-group gigabitethernet "vlan204"
    apply-to 0/0/30-0/0/47,0/1/1-1/0/11
    mstp-profile "PortFast"
    poe-profile "poe-factory-initial"
    aaa-profile "default"
    switching-profile "vlan204"
    !

     

    config after upgrade

    interface-group gigabitethernet "vlan204"

     

    mstp-profile "PortFast"
    poe-profile "poe-factory-initial"
    aaa-profile "default"
    switching-profile "vlan204"
    !



  • 2.  RE: upgraded MAS s2500 from 7.3 to 7.4.0.1 and some interfaces lost vlans

    Posted Feb 19, 2015 10:57 PM


    The config you supplied seems to have 'typo'
    because when I tried the exact config:

    (MAS) (config) #interface-profile switching-profile "vlan204"
    (MAS) (gigabitethernet "vlan204") #apply-to 0/0/30-0/0/47,0/1/1-1/0/11
    Invalid value

    i.e,
    The last interface ID 1/0/11 --> this is invalid, I suppose you mean 1/0/1 ?

    Assuming that, I tried below config on 7.3.0.0 (build-40599)

    interface-group gigabitethernet "vlan204"
       apply-to 0/0/30-0/0/47,0/1/1-1/0/1
       mstp-profile "PortFast"
       poe-profile "poe-factory-initial"
       aaa-profile "default"
       switching-profile "vlan204"
    !


    Then, upgraded to 7.4.0.1 (build-47484).

     ==> Post upgrade, I don't see the issue.
            Meaning: same above configuration remained intact

     

    Rgds,

    -Vinay



  • 3.  RE: upgraded MAS s2500 from 7.3 to 7.4.0.1 and some interfaces lost vlans

    Posted Feb 19, 2015 11:00 PM

    Rectifying a small copy paste error of mine in above:

     

    (MAS) (config) #interface-group gigabitethernet "vlan204"
    (MAS) (gigabitethernet "vlan204") #apply-to 0/0/30-0/0/47,0/1/1-1/0/11
    Invalid value

     

    With proper ports specified issue is not seen.



  • 4.  RE: upgraded MAS s2500 from 7.3 to 7.4.0.1 and some interfaces lost vlans

    Posted Feb 20, 2015 08:40 AM

    Not a typo.  pasted from tfpt copy of run cfg of MAS.

     

    I fixed by changing 0/1/1 to 1/0/0 

    does 7.4.0.1 process interface ranges differently?

     

    Thanks for reply



  • 5.  RE: upgraded MAS s2500 from 7.3 to 7.4.0.1 and some interfaces lost vlans

    Posted Feb 20, 2015 09:29 AM

    Chewbacca-jhh,

     

    Please open a case with TAC, so that they can replicate with your config.

     



  • 6.  RE: upgraded MAS s2500 from 7.3 to 7.4.0.1 and some interfaces lost vlans

    Posted Feb 20, 2015 09:58 AM

    case #1653750