Currently all of my switches are at 188.8.131.52. When I upgrade the switches to .2 or .3, my servers which have static assigned IPs start throwing IP conflict. I have to restart the network on these servers and then they are fine for a day, then the IP conflict shows up again.
This does not happen with 184.108.40.206 or any previous version that I can remember.
The Static IPs are not in a DHCP range. All the NICs are configured the same as best I can tell, and it only happens on our Public IP range. This does not happen to any NAT IPs even if they are statically assigned.
All of our IP ranges are on VLAN 1 with the exception of our Phones.
I really hope this is something easy I have overlooked. Any help is appreciated.
Since we don't have access to your configs, it is probably a good idea to open a TAC case in parallel.
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.