Hi All
Wonder if someone can help me.
I have an IAP-225-RW that I'm using at home standalone, and all has been working fine, but recently, after buying my first home, I decided
I would love to extend my AP's and have more around. I bought an AP-205 that is working as a standalone device, and is working perfectly, but only
when either AP is connected to the switch.
The issue I'm having is, when the 225 is up and live, then I plug in the 205 and allow it to boot, it will only get so far, and only the Lan light will flash and
it won't fully boot so the WIFI lights are on etc. It will keep trying but won't succeed.
If I unplug my 225, then the 205 will start up and work without a problem.
I have also tried to boot up the 205 first, and then plug in the 225, but I then find that the 225 won't fully boot and does something similar to the 205.
I know both of the devices are a bit different, and both are on different firmware revisions, but can anyone help point me in the right direction please?
The 205 was bought from a guy who know's Aruba, but he's a bit confused what's going on. He has 7 of the 205's running in his home and all is fine, including the one I bought. We have tried changing the Master option, on both devices, and I don't have the roaming on Mesh setup or attempting to right now, but don't know if there's something I'm overseeing here?
The 225 is on Firmware 8.6.0.2
The 205 I can't remember but it's something like 6.x.x
I have bought some more 205's just in case, I cannot get the 225 to work, but would love to be able to utilise this too.
Thanks for all your help and advice
Mo
------------------------------
Mo Kennedy
------------------------------