Wired

last person joined: 17 hours ago 

Bring performance and reliability to your network with the Aruba Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of the ArubaOS-Switch and ArubaOS-CX devices, and find ways to improve security across your network to bring together a mobile first solution.
Expand all | Collapse all

Netedit 2.0.1 - Topology view is empty

This thread has been viewed 22 times
  • 1.  Netedit 2.0.1 - Topology view is empty

    Posted 21 days ago
    I am running unlicensed version of Netedit 2.0.1 in lab. I discovered 4 switches and I can see them in device list and can apply plans on them, but in topology view I can see total of devices is 0. Is this because I have unlicensed version or something wrong in 2.0.1 or in my configuration. 



    ------------------------------
    Ahmad Enaya
    ------------------------------


  • 2.  RE: Netedit 2.0.1 - Topology view is empty

    Posted 20 days ago
    I suggest using NetEdit 2.0.9 along with the more recent CX firmware on your switches.

    ------------------------------
    Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.
    ------------------------------



  • 3.  RE: Netedit 2.0.1 - Topology view is empty

    Posted 20 days ago
    Why not to suggest the Aruba NetEdit 2.0.12 which is the most updated version currently available?





  • 4.  RE: Netedit 2.0.1 - Topology view is empty

    Posted 19 days ago
    you are right, that's the better option.

    ------------------------------
    Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.
    ------------------------------



  • 5.  RE: Netedit 2.0.1 - Topology view is empty

    Posted 17 days ago
    I agree with the others that upgrading to 2.0.12 (or whatever is the latest release) is recommended. To answer your question about why this is happening, to my knowledge we don't limit functionality in the unlicensed version of NetEdit. Additionally, I don't see how this would be caused by a misconfiguration on the switch, since the search bar shows "4 Devices" and the summary in the upper right shows "Total Devices: 0" (what is shown is not consistent with itself).

    Many bugs (potentially like this one) have been fixed since the 2.0.1 release. You could also try refreshing your browser window (Shift+reload) to see if that clears out some client-side cache causing this issue. In either case, I'd suspect that upgrading will resolve the issue.

    ------------------------------
    Shaun Wackerly
    ------------------------------



  • 6.  RE: Netedit 2.0.1 - Topology view is empty

    Posted 14 days ago
    NetEdit 2.1 is now released and available on asp.arubanetworks.com
    TACACS support is here :-)


    ------------------------------
    Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.
    ------------------------------