Wired Intelligent Edge

 View Only
last person joined: yesterday 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

ACL for communication between VLANs

This thread has been viewed 8 times

  • 1.  ACL for communication between VLANs

    Posted May 25, 2020 05:45 PM

    Hello

    I have an aruba 2930F switch where I have created 3 vlan

    I want vlan 2 and vlan 3 to have full input and output communication with these vlan 1 addresses (192.168.1.71 and 192.168.1.79)


    #2930F


  • 2.  RE: ACL for communication between VLANs

    Posted Jun 07, 2020 03:41 AM

    Hi,

     

    can I know where the VLAN 2 & VLAN 3 gateway configured?

     

    If the gateways are configured on the same switch then all end will communicate using local and direct routes from the gateway?

     

    and if VLANs gateways are in different switches then required routing and ACL are required to configure.

     

    Best Regards,

    Suresh