Fairly new to HP gear so I'm not 100% I'm even using the right terms for OSes etc, but hopefully this makes sense.
I've been playing with Ansible a (very) little, and was going to try and use it to update the firmware for some InstantAPs (the 315 model if it matters)Trying to connect to the devices using aruba_config or aruba_command modules gets me an error 'unable to set terminal parameters', while trying to use the arubaoss modules returns 'No JSON object could be decoded'I don't think what I'm doing is actually supported as everything mentions aruba switch, not aruba ap but I was looking for any assistance or pointers in the right direction to see what I can do to automate the firmware upgrades on these APs.Thanks.
the ansible module is only (for the moment...) for Switch (Aruba / Ex Procuvre and ArubaCX).
With new release of IAP (8.5), there is now API... may be it will be a a ansible module later...
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.