How are you managing the iAP configuration? One of the key benefits of Airwave is the ability to manage them, as well as to monitor and not mismatched etc.
To have a mismatch, Airwave must already have a template in place - probably imported from the first iAP you put into the group.
If the differences are things like iAP name and virtial-controller IP address etc., try going to the 'manage' panel for the mismatched iAP and enter the correct data in the fields.
Whether this works will depend on how the template in use was generated.
Good luck, and bring us bac some specifics if you still need help.
------------------------------
--Matthew
If I have in some way helped, please click the KUDOS button
------------------------------
Original Message:
Sent: Nov 30, 2020 10:31 AM
From: Dave Abels
Subject: IAP/AirWave 'mismatches'
I am running airwave 8.2.10.1 and when I try to fetch a new template there are no devices to choose from to fetch. how do I get it to fetch the current config as I do make changed from the instant and not from airwave.
------------------------------
Dave Abels
Original Message:
Sent: Mar 31, 2020 08:33 AM
From: Dinusha Chandrasinghe
Subject: IAP/AirWave 'mismatches'
"Mismatch" mean IAP cluster configuration and existing AMP configuration not same. due to you might change the configuration from the Instant dashboard. (You can fetch new configuration from Instant and fix mismatch issue)